2篇
您的检索式：作者名="Nicolas CALON"
|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Investigation of the hydro-mechanical behaviour of fouled ballast显示文摘In this study,a fouled ballast taken from the site of Sénissiat,France,was investigated.For the hydraulic behaviour,a large-scale cell was developed allowing drainage and evaporation tests to be carried out with monitoring of both suction and volumetric water content at various positions of the sample.It was observed that the hydraulic conductivity of fouled ballast is decreasing with suction increase,as for common unsaturated soils.The effect of fines content was found to be negligible.For the mechanical behaviour,both monotonic and cyclic triaxial tests were carried out using a large-scale triaxial cell.Various water contents were considered.The results were interpreted in terms of shear strength and permanent axial strain.It appeared that the water content is an important factor to be accounted for since any increase of water content or degree of saturation significantly decreases the shear strength and increases the permanent strain.Constitutive modelling has been attempted based on the experimental results.The model in its current state is capable of describing the effects of stress level,cycle number and water content. | Yu-jun CUI Trong Vinh DUONG Anh Minh TANG Jean-Claude DUPLA Nicolas CALON Alain ROBINET | 2013 | Journal of Zhejiang University-Science A(Applied Physics & Engineering)2013，14，4： | 2 |
| 2 | Impact of train speed on the mechanical behaviours of track-bed materials显示文摘For the 30,000 km long French conventional railway lines(94% of the whole network),the train speed is currently limited to 220 km/h,whilst the speed is 320 km/h for the 1800 km long high-speed lines.Nowadays,there is a growing need to improve the services by increasing the speed limit for the conventional lines.This paper aims at studying the influence of train speed on the mechanical behaviours of track-bed materials based on field monitoring data.Emphasis is put on the behaviours of interlayer and subgrade soils.The selected experimental site is located in Vierzon,France.Several sensors including accelerometers and soil pressure gauges were installed at different depths.The vertical strains of different layers can be obtained by integrating the records of accelerometers installed at different trackbed depths.The experimentation was carried out using an intercity test train running at different speeds from 60 km/h to 200 km/h.This test train was composed of a locomotive(22.5 Mg/axle) and 7 'Corail'coaches(10.5 Mg/axle).It was observed that when the train speed was raised,the loadings transmitted to the track-bed increased.Moreover,the response of the track-bed materials was amplified by the speed rise at different depths:the vertical dynamic stress was increased by about 10% when the train speed was raised from 60 km/h to 200 km/h for the locomotive loading,and the vertical strains doubled their quasistatic values in the shallow layers.Moreover,the stressestrain paths were estimated using the vertical stress and strain for each train speed.These loading paths allowed the resilient modulus Mrto be determined.It was found that the resilient modulus(M_r) was decreased by about 10% when the train speed was increased from 100 km/h to 200 km/h.However,the damping ratio(D_r) kept stable in the range of speeds explored. | Francisco Lamas-Lopez Yu-Jun Cui Nicolas Calon Sofia Costa D’Aguiar Tongwei Zhang | 2017 | Journal of Rock Mechanics and Geotechnical Engineering2017，9，5： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员