|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Dust dispersion and management in underground mining faces显示文摘Presence of fine dust in air causes serious health hazard for mine operators resulting in such serious problems as coal workers’pneumoconiosis and silicosis.Major sources of dust appear of course along the mining face where the minerals are extracted.Proper control and management are required to ensure safe working environment in the mine.Here,we utilize the computational fluid dynamic(CFD)approach to evaluate various methods used for mitigating dust dispersion from the mining face and for ensuring safe level of dust concentration in the mine tunnel for safety of the operators.The methods used include:application of blowing and exhaust fans,application of brattice and combination of both.The results suggest that among the examined methods,implementation of appropriately located brattice to direct the flow from the main shaft to the mining face is the most effective method to direct dust particles away from the mining face. | Kurnia Jundika Candra Sasmito Agus Pulung Mujumdar Arun Sadashiv | 2014 | International Journal of Mining Science and Technology2014,24,1: | 39 |
| 2 | 喷雾干燥的研究进展显示文摘介绍了国内外喷雾干燥领域的最新研究进展,阐述了喷雾冷冻干燥、超临界喷雾干燥等方面的研究结果,探讨了关于喷雾干燥过程数学模拟的研究方法和结论,总结、归纳并提出了目前国内外较新的关于喷雾干燥的研究课题和方向。 | 黄立新 周瑞君 A S Mujumdar | 2009 | 干燥技术与设备2009,7,5: | 25 |
| 3 | 喷雾干燥过程中产品玻璃化温度转变和质量控制显示文摘通过分析物料在整个喷雾干燥阶段中的温度和颗粒状态变化,研究物料的玻璃化转变特性和产品质量与干燥工艺参数的关系,得出了相应的结论,并提出了因颗粒玻璃化转变的原因造成产品的质量变化的调整方法。 | 黄立新 周瑞君 MUJUMDAR A S | 2007 | 林产化学与工业2007,27,1: | 21 |
| 4 | 喷雾冷冻干燥在植物提取和医药中的应用显示文摘通过比较喷雾干燥、冷冻干燥和喷雾冷冻干燥各自的特点,介绍了一种新型的干燥方法即喷雾冷冻干燥的机理,归纳和总结国外喷雾冷冻干燥在植物提取和医药中的应用研究进展,分析了通过喷雾冷冻干燥获得的干燥产品的特性,并提出了其可能的应用领域和范围,为进一步研究喷雾冷冻干燥技术提供相应的理论和实践基础。 | 黄立新 郑文辉 王成章 MUJUMDAR A S LEUENBERGER H | 2007 | 林产化学与工业2007,27,B10: | 15 |
| 5 | 不同干燥方式制备白果粉的性能比较显示文摘天然产物白果会因干燥方式的不同,而使得干燥白果粉性能有所差别。本研究分别采用喷雾干燥(SP)与真空冷冻干燥(FD)对白果浆进行干燥处理。然后对两种干燥白果粉的性能(含水量、颗粒度、色泽、蛋白质质量分数)进行对比来比较各自的优越性。喷雾干燥采用参数:风量120m3/h,进料浓度8%(质量分数),进气温度205℃,出气温度100℃,雾化器转速32000r/min。真空冷冻干燥先在-40℃下预冻4h后,再在真空度300Pa下-50℃低温干燥48h。结果发现含水量SP | 张彩虹 黄立新 刘伟 MUJUMDAR A S | 2009 | 生物质化学工程2009,43,6: | 14 |
| 6 | 白果浆喷雾干燥工艺研究显示文摘采用白果浆为原料进行喷雾干燥工艺研究。以进气温度、风量、出气温度、进料质量分数为影响因素,设计了L16(45)的正交试验,对干燥白果粉末性能(含水量(MC)、色差(CD)、平均粒径(MPS)、蛋白质质量分数(wp))进行了分析。结果表明:出口气体温度对白果粉末的MC和wp有显著影响,进料质量分数对白果粉末的MPS有显著影响,进口气体对白果粉末的wp有一定影响。得出白果喷雾干燥制粉的最佳工艺条件为:进气温度190℃,风量120 m3/h,出气温度110℃,进料质量分数10%。在此条件下得到的粉末质量特性:含水量5.20%(质量分数),色差19.76,平均粒径22.0μm,wp 9.83%,均达到最佳质量范围。 | 张彩虹 黄立新 MUJUMDAR A S | 2010 | 林产化学与工业2010,30,2: | 9 |
| 7 | 奶粉的喷雾冷冻干燥研究显示文摘研究开发了实现喷雾冷冻干燥工艺的装置,并以奶粉为物料,进行了试验研究。结果表明,料液可以在-40~-30℃实现快速冷冻,且采用该喷雾冷冻干燥装置可将干燥时间从原来真空冷冻干燥的48h缩短为10h。最后,对获得的干燥产品进行了粉体形态的测试和分析。 | 黄立新 周瑞君 Mujumdar A S | 2009 | 化工机械2009,,3: | 7 |
| 8 | Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study显示文摘A proper control and management of dust dispersion is essential to ensure safe and productive underground working environment. Brattice installation to direct the flow from main shaft to the mining face was found to be the most effective method to disperse dust particle away from the mining face. However,it limits the movement and disturbs the flexibility of the mining fleets and operators at the tunnel. This study proposes a hybrid brattice system- a combination of a physical brattice together with suitable and flexible directed and located air curtains- to mitigate dust dispersion from the mining face and reduce dust concentration to a safe level for the working operators. A validated three-dimensional computational fluid dynamic model utilizing Eulerian–Lagrangian approach is employed to track the dispersion of dust particle. Several possible hybrid brattice scenarios are evaluated with the objective to improve dust management in underground mine. The results suggest that implementation of hybrid brattice is beneficial for the mining operation: up to three times lower dust concentration is achieved as compared to that of the physical brattice without air curtain. | Kurnia Jundika C. Sasmito Agus P. Hassani Ferri P. Mujumdar Arun S. | 2015 | International Journal of Mining Science and Technology2015,25,4: | 7 |
| 9 | 基于干燥均匀性的真空脉动干燥加热控制技术显示文摘为解决真空脉动干燥中加热板差异和气流扰动引起的物料干燥不均匀问题,设计了基于过零触发控制的加热板辐射强度控制硬件电路,将PID控制理论和离群点检测方法相结合,提出了加热板温度离群点优化积分分离PID控制策略,以含水率均匀一致的面片作为试验原料,以干燥均匀度为考核指标,对控制系统的控制效果进行试验验证。试验结果表明:该控制系统可以有效缩小不同加热板间的辐射强度差异,平均温度控制精度±0. 8℃,初始阶段调节时间120 s,在受到气流扰动干扰后能够迅速恢复;在干燥均匀性方面,离群点优化PID控制优于独立PID控制和整体PID控制,可以减小气流扰动对干燥整体均匀性的影响,面片干燥均匀度由90%左右提高到95%以上。 | 薛令阳 王书茂 MUJUMDAR A S 王军 于贤龙 高振江 | 2019 | 农业机械学报2019,50,4: | 4 |
| 10 | 工业干燥的革新现状与研发需求显示文摘在过去的30年,全球干燥研发活动呈现出快速增长趋势。尽管热力干燥在几乎所有主要工业生产部门都是一个重要的单元操作,干燥基础和工业应用研究却是在上世纪70年代早期发生能源危机后才开始兴起。随后石油价格下跌,但人们已认识到改善干燥操作以节省能源、提高产品质量、减少环境影响的重要性;最近几年更增强了这种意识。新的干燥技术、更好的操作措施和干燥机控制策略、先进和可靠的放大方法,已经帮助生产出低成本和高质量的干燥产品。由于没有一个普遍适用的干燥理论,多数干燥数学模型仅适用于特定的产品和设备。本文将讨论革新在不同工业干燥部门如纸张、木材、农产品、废弃物等所发挥的作用,概述过去30年干燥研究的进展和面对的挑战,指出一些需要继续研究努力的干燥领域,举例讨论通过数学模型强化干燥器设计的革新,同时强调指出,学术界与工业界紧密互动是未来10年干燥研发获得成功的关键。 | Arun S Mujumdar 吴中华 | 2007 | 干燥技术与设备2007,5,2: | 4 |
| 11 | DEM simulation of polydisperse systems of particles in a fluidized bed显示文摘Numerical simulations based on three-dimensional discrete element model (DEM) are conducted for mono-disperse, binary and ternary systems of particles in a fluidized bed. Fluid drag force acting on each particle depending on its size and relative velocity is assigned. The drag coefficient corresponding to Ergun’s correlation is applied to the system of fluidized bed with particle size ratios of 1:1 for the mono-disperse system, 1:1.2, 1:1.4 and 1:2 for the binary system and 1:1.33:2 for the ternary system by keeping total volume and surface area of the particles constant. Results indicated that a reasonable estimation of drag force based on individual particle diameters as compared to that of the mean diameter of the particles is achieved in the fluid cells. The total translational kinetic energy of the particles is found to increase as the particle size ratio increases, suggesting an enhanced momentum transfer in polydisperse particle systems. Systems with wide particle size distribution exhibited higher particle velocities around bubbles, resulting in faster bubble growth and its subsequent rise through the fluidized bed. | Nobuyuki Tagami Ajit Mujumdar Masayuki Horio | 2009 | Particuology2009,7,1: | 3 |
| 12 | Drying Technology: Trends and Applications in Postharvest Processing显示文摘 | Arun S. Mujumdar Chung Lim Law | 2010 | Food and Bioprocess Technology2010,,6: | 2 |
| 13 | 喷雾干燥改性白果粉的分散性及流动性研究(英文)显示文摘对喷雾干燥改性白果粉的流动性及分散性进行了研究。以麦芽糊精、β-环糊精、阿拉伯胶为改性辅料,研究辅料品种、辅料添加比例对白果粉分散性及流动性的影响。还研究了水温对改性白果粉分散性的影响。结果表明:β-环糊精为最佳辅料,在60℃时,分散性随β-环糊精比例增加而增加,当β-环糊精与白果粉比例为4:10时,效果较好;在40℃时分散性随β-环糊精比例增加呈先增后减的趋势,当β-环糊精与白果粉比例为3:10时,效果较好。改性白果粉的分散性随着水温的增加呈先增加后减小的趋势,最大分散性出现在40~60℃范围内。 | 张彩虹 黄立新 刘伟 谢普军 Arun S MUJUMDAr | 2011 | 生物质化学工程2011,45,4: | 2 |
| 14 | A Critical Assessment of Industrial Coal Drying Technologies: Role of Energy, Emissions, Risk and Sustainability显示文摘 | S.V. Jangam M. Karthikeyan A.S. Mujumdar | 2011 | Drying Technology2011,,4: | 2 |
| 15 | Microwave freeze drying of sea cucumber ( Stichopus japonicus )显示文摘 | Xu Duan Min Zhang Arun S. Mujumdar Shaojin Wang | 2009 | Journal of Food Engineering2009,,4: | 2 |
| 16 | A Comparative Study of Four Drying Methods on Drying Time and Quality Characteristics of Stem Lettuce Slices (Lactuca sativa L.)显示文摘 | AzamS. M. Roknul Min Zhang ArunS. Mujumdar Yuchuan Wang | 2014 | Drying Technology2014,,6: | 2 |
| 17 | Physical Interpretation of Solids Drying: An Overview on Mathematical Modeling Research显示文摘 | Wei Wang Guohua Chen Arun S. Mujumdar | 2007 | Drying Technology2007,,4: | 2 |
| 18 | Triptolide inducescell death in pancreatic cancer cells by apoptotic and autophagicpathways 显示文摘 | Mujumdar N Mackenzie TN Dudeja V | 2010 | Gastroenterology2010,139,2: | 1 |
| 19 | Effects of vacuum and microwave freeze drying on microstrueture and quality of potato slices 显示文摘 | Wang Rui Zhang Min Mujumdar Arun S | 2010 | Journal of Food Engineering2010,101,2: | 1 |
| 20 | Triptolide induces cell death in pancreatic cancer ceils by apoptotic and autophagic pathways 显示文摘 | Mujumdar N Mackenzie T N Dudeja V | 2010 | Gastroenterology2010,139,2: | 1 |